What is a street light base?
It is one of the various types of monopole masts for street lights. Perhaps, in terms of the number of types, types and applications, no telecommunications tower has as many sub-branches as the Monopole tower. But today, in this article, we will try to briefly explain the production steps of the multi-faceted mast type street light base. However, the production of this type of mast is not different from other types of monopole masts such as traffic lights, flag stands, lighting masts, CCTV masts, etc.
But the street light base is a type of monopole mast in categories that are used for installation in paths, passages, alleys and roads in order to illuminate the length of the path using the light on top of the mast.
Street light base
Production of street light base in Towerco factory
For the construction and production of the street light base in the Towerco mast production factory, after calculating and drawing the mast, steel sheets are cut. Of course, there are two different types of street lamp base and basically this type of masts makes the production path very different. And that is the spiral or tubular type and the multifaceted type of mast. In this article, we are talking about multi-faceted monopole masts, and in the future, we will write a detailed article about the type of production of tubular monopole masts.
Multi-faceted lamp base (manopole mast).
This type of monopole mast imposes a higher cost compared to the tubular monopole mast, but it is more resistant to wind and blows than the tubular mast. Usually, in the production of multi-faceted lamp base, a 6- or 8-sided cross-section is used, which has a larger diameter at the bottom of the mast, and the diameter of the mast decreases as the height increases.
Multifaceted rig production equipment
One of the most important equipments for the construction of a monopole rig is a sheet bending machine, which was explained in detail in the previous article. In short, it is important to know that in order to create an angle in the steel sheet, an automatic sheet bending machine is needed to make a multi-faceted monopole mast. to angle the steel sheets in the best possible way. After this stage, the sections of the mast are connected to each other with very precise welding on a scientific basis.
Production of multi-faceted street light base
The price of the lamp base
As mentioned above, the production of a multi-faceted street light base costs more than a tubular one. And these costs include the cost of drawing and accurate calculations, the price of steel sheet, the thickness of the sheet, the number of parts, the foundation of the multi-faceted mast, the width of the mast, the bottom to the top, the number of lamp base masts, the manpower cost of the multi-faceted mast production factory and so on. … .
Our suggestion for you, the consumer and the buyer of the street lamp base mast, and to buy the mast with the best price and guaranteed quality, is to contact Towerco’s mast sales unit.
